Classic goes bulk route at Kat Gap as mining milestone looms

Classic Minerals is one step closer to gold production, having been approved to mine a bulk sample at its Kat Gap project in WA.

The state’s Department of Mines, Industry Regulation and Safety (DMIRS) approved Classic’s (ASX:CLZ) request for the sample, during which the company expects to expose between 3000 and 5000 tonnes of ore at 4-6 grams per tonne gold for 350-1000 contained ounces.

The activity will assist in the calibration of mining and metallurgy parameters at Kat Gap.

The materials to be mined make up part of Kat Gap’s 93,000oz mineral resource.

Classic
A long-section of the trial pit, with grid block dimensions of 25m. Pic: Supplied.

Classic has DMIRS excess tonnage and Native Title approval to excavate up to 49,000t from Kat Gap under the terms of the underlying exploration tenure and has received approval of a project management plan from state government engineers.

Why bulk sample?

Classic said the bulk sample program was being undertaken to further de-risk the project and give the company and its investors increased confidence in executing the greater mining operation.

The three key reasons for bulk sampling were outlined as follows:

  • Metallurgical verification: To provide metallurgical verification and help fine-tune the Gekko plant currently being delivered to the Kat Gap site ahead of full-scale production.
  • Mine engineering data: To give geological and engineering teams the ability to measure structural data firsthand from the walls and floor of the test pit, with a view to allowing the selection of the best geotechnical parameters to maximise safety and minimise strip ratios. Realistic dilution and ore loss parameters will also be gleaned, and this will assist project economics when full-scale mining commences.
  • Geological data: The trail pit will allow Classic to take structural measurements of exposed gold mineralisation, which could shed light on the presence or attitude of additional lodes which could be targeted for increases to resource inventory. Grade distribution can also be studied to determine how varying grade models stand up to the results of the trial, allowing optimisation of modelling and drilling activities.
Looking west at Kat Gap. Pic: Supplied.

Classic is targeting first gold pour at Kat Gap, part of the broader 403,000oz Forrestania gold project, by the end of August.

Classic also recently received commitment from Independence Group to spend a further $1.5 million over two years at the pair’s Fraser Range JV project.

 

 

This article was developed in collaboration with Classic Minerals, a Stockhead advertiser at the time of publishing.

 

This article does not constitute financial product advice. You should consider obtaining independent advice before making any financial decisions.

 

The post Classic goes bulk route at Kat Gap as mining milestone looms appeared first on Stockhead.

Barry Stroman was a reporter for Zerg Watch, before becoming the lead editor. Barry has previously worked for Wired, MacWorld, PCWorld, and VentureBeat covering countless stories concerning all things related to tech and science. Barry studied at NYU.

You May Also Like

Leave a Reply

Your email address will not be published. Required fields are marked *